The following are pictures of an office furniture lock (awaiting
original manufacturer information) marked as "ZG 0038". No key blank
was found that would go in without modification. What was used was a
Taylor# X114/Ilco# DA24 blank modified to being .250 inch in width (by
cutting ~.015" from each side). The cuts for this key are 132313
(although the wafers are mastered, the cuts appearing to be 143414,
using a Taylor# X115/Ilco# DA23 modified the same as before). The specs
for cutting this are as follows:
1st Cut: .100"
Spacing: .100"
Depths:
--JAB
- .250"
- .230"
- .210"
- .190"
--JAB
(Originally created 10/25/13 on the Evernote app)
Return to Lock Notes Index
